2016-2023 Toyota Tacoma Front Hidden Bumper Light Bar Mount Brackets

fit very well

unfortunately the brackets didn’t come with instructions nor L or R side labeling them. of course i followed the picture on the Add to Cart page.
as my luck would have it i installed the brackets backwards.
Be sure to install opposite of picture.

Very solid and certain it will stay in place. Installation went well, tight to maneuver but went well.
Only issue I had was the need to enlarge the slots where the light bar attached. This was due to using a Nilight light bar (Nilight light bar's hardware was much more formidable) instead of the Dasen light bar (personal choice due to past very positive experiences with Nilight).

Not sure why people are saying this is hard to install. Fit perfectly on my 2018 Tacoma. Took maybe 15-20 mins to install the brackets. Take off the grille with the 2 10mm bolts and 2 clips, then remove the 2 outer 14mm nuts (deep well socket helps but if you don’t click you socket in all the way a normal socket works) on the crash bar and bolt back down. I’ve seen where people are putting them on the single inside bolt and that is definitely incorrect, the bracket has 2 holes to slide over the 2 bolts on the crashbar

Some challenges to set the brackets at the correct angle but once in place they stay firmly without the light bar moving